Skip to content
CONTRACTOR DIRECT LIGHTING
CONTRACTOR DIRECT LIGHTING
Light More Space with Fewer Dark Spots: Meet the LC1006 LED Wide Beam Angle Canopy Light

Light More Space with Fewer Dark Spots: Meet the LC1006 LED Wide Beam Angle Canopy Light

Dark corners, uneven illumination, and outdated canopy fixtures can make parking structures, gas stations, loading docks, and commercial entrances feel less safe and less professional.

The LC1006 LED Wide Beam Angle Canopy Light from Contractor Direct Lighting is designed to spread bright, dependable illumination across large covered areas. With a wide 190-degree beam angle, selectable wattage, selectable color temperature, 0–10V dimming, and weather-resistant construction, it gives contractors and property managers greater flexibility for demanding outdoor projects.

Shop the LC1006 LED Wide Beam Angle Canopy Light

Is Your Canopy Lighting Leaving Dark Spots Behind?

Covered commercial areas often present unique lighting challenges.

A fixture may look bright directly underneath, yet leave surrounding areas unevenly illuminated. Poor fixture spacing, narrow beam distribution, insufficient output, and aging lamps can create dark zones around:

  • Fuel pumps
  • Parking spaces
  • Pedestrian walkways
  • Loading areas
  • Building entrances
  • Covered drive lanes
  • Payment and service areas

These dark spots can reduce visibility and make an otherwise well-maintained property feel less welcoming.

The LC1006 is engineered with a 190-degree beam angle to distribute illumination broadly across canopy surfaces and surrounding areas. This makes it a practical option for commercial projects where wider coverage is required.

What Is the LC1006 LED Wide Beam Angle Canopy Light?

The LC1006 Contractor Direct Lighting LED Wide Beam Angle Canopy is a square commercial fixture designed for overhead installation in covered outdoor and semi-enclosed spaces.

It is suitable for:

  • Gas stations
  • Parking garages
  • Loading docks
  • Covered walkways
  • Retail entrances
  • Service areas
  • Commercial building canopies
  • Other covered outdoor environments

The fixture combines adjustable performance, broad light distribution, commercial voltage compatibility, and an IP65 wet-location rating for dependable outdoor use.

Get Wider Coverage with a 190° Beam Angle

One of the LC1006’s most important features is its 190-degree beam angle.

A wider beam helps distribute illumination outward instead of concentrating most of the light directly beneath the fixture. This can support more uniform coverage across large canopies, parking structures, entrances, docks, and covered drive areas.

Broader distribution may also help lighting designers and contractors reduce harsh hot spots while improving visibility between fixtures.

The correct quantity and spacing will still depend on mounting height, site dimensions, surrounding surfaces, and required light levels. A professional photometric layout is recommended for larger commercial projects.

Selectable Wattage for Flexible Installation

Not every canopy area requires the same amount of light.

The LC1006 includes three field-selectable wattage settings:

  • 60W
  • 75W
  • 90W

This allows contractors to adjust the fixture’s power based on mounting height, spacing, site conditions, and desired illumination.

For example, a lower covered walkway may require less output than a large gas-station canopy or elevated loading area. Selectable wattage gives installers more flexibility without requiring a completely different fixture for every location.

Up to 12,557 Lumens of Commercial Illumination

The LC1006 delivers a published lumen range of approximately 7,920 to 12,557 lumens, depending on the selected wattage and color-temperature setting.

This high-output range makes it suitable for demanding commercial areas that require strong overhead illumination, including parking structures, fuel-station canopies, loading zones, retail entrances, and high-traffic covered spaces.

Choose Between 3000K, 4000K, and 5000K

The right color temperature affects both appearance and visibility.

The LC1006 offers three selectable color-temperature settings:

3000K Warm White

A softer, warmer appearance that can create a more welcoming atmosphere around hospitality properties, retail entrances, covered walkways, and architectural areas.

4000K Neutral White

A balanced option for general commercial lighting, parking structures, loading docks, and mixed-use outdoor spaces.

5000K Daylight White

A crisp, bright appearance often preferred for gas stations, security-focused areas, service zones, and locations where visual clarity is a priority.

Because the color temperature is selectable, contractors can make the final choice during installation instead of purchasing separate fixed-CCT fixtures.

Improve Lighting Control with 0–10V Dimming

The LC1006 supports 0–10V dimming, allowing compatible commercial lighting controls to adjust the fixture’s output.

Dimming can help property owners:

  • Reduce light levels during low-traffic hours
  • Improve energy management
  • Adapt illumination to changing site conditions
  • Avoid unnecessary brightness
  • Integrate fixtures into a broader control system

The product also includes an integrated DC sensor port and supports an optional photocell add-on, providing additional options for automated lighting control.

Sensor-Ready for Smarter Outdoor Lighting

Commercial exterior lighting does not always need to operate at full output throughout the entire night.

With compatible controls, sensor-ready lighting can help adjust operation based on occupancy or ambient daylight conditions.

An optional photocell can automatically turn the fixture on when natural light decreases and switch it off when daylight returns. Depending on the project and compatible components, additional sensor controls may help reduce unnecessary operating hours while maintaining visibility when needed.

Built for Demanding Outdoor Environments

Outdoor commercial lighting must handle more than ordinary indoor conditions.

The LC1006 includes:

  • Die-cast aluminum housing
  • Polycarbonate lens
  • Bronze finish
  • IP65 environmental rating
  • Wet-location suitability
  • Multiple half-inch knockouts
  • Three-quarter-inch rear knockout for pendant applications
  • Operating range from -40°F to 122°F

These features make the fixture suitable for covered commercial spaces exposed to moisture, temperature changes, dust, and demanding operating conditions.

Built-In 6KV Surge Protection

Outdoor electrical systems can be exposed to voltage fluctuations and environmental stress.

The LC1006 includes built-in 6KV surge protection, providing an additional layer of protection for the fixture’s electrical components.

Surge protection does not replace proper electrical design, grounding, or external protective devices, but it is a valuable commercial feature for outdoor lighting applications.

Designed for 15- to 20-Foot Mounting Heights

The LC1006 has a published recommended mounting height of approximately 15 to 20 feet.

This range makes it well suited for:

  • Gas-station canopies
  • Higher parking structures
  • Covered loading areas
  • Large building entrances
  • Commercial forecourts
  • Elevated outdoor ceilings

Actual mounting height, fixture spacing, and selected wattage should be confirmed through a lighting plan based on the site’s dimensions and required foot-candle levels.

Ideal Applications for the LC1006

Gas Stations

Bright and uniform canopy lighting helps drivers, customers, and employees see pumps, payment terminals, vehicles, walkways, and service areas more clearly.

Parking Garages

Wide light distribution can help reduce dark areas between fixtures and improve visibility across drive lanes, pedestrian zones, ramps, and parking spaces.

Loading Docks

Loading areas require dependable illumination for vehicles, equipment, packages, employees, and nighttime operations.

Retail Entrances

A properly illuminated entrance can make a business look active, clean, and welcoming after sunset.

Covered Walkways

Broad illumination helps pedestrians navigate pathways, steps, doors, and transitions between indoor and outdoor areas.

Commercial Canopies

The fixture can be used under service canopies, drive-through areas, building overhangs, porte-cochères, and other covered commercial structures.

How Does the LC1006 Compare with Other Canopy Lights?

The right canopy fixture depends on the project’s size, mounting height, shape, and required output.

LC1006 Wide Beam Angle Canopy

Choose the LC1006 when you need:

  • Up to 90W selectable power
  • Up to 12,557 lumens
  • A very wide 190-degree beam
  • 15- to 20-foot mounting
  • Sensor-ready controls
  • Strong commercial outdoor performance

View the LC1006 Wide Beam Canopy Light

LC1005 Commercial Canopy Light

The LC1005 LED Canopy Light is a compact 40W option with selectable color temperature, a 150-degree beam angle, IP65 construction, and up to 5,293 lumens. It may be better suited to lower-roof structures, covered walkways, storage areas, and entryways.

LC1004 Round Garage Canopy Light

The LC1004 LED Round Garage Canopy Light offers a round, low-profile design for parking garages, carports, passageways, and covered commercial spaces.

LC1003 Gas Station Canopy Light

The LC1003 LED Gas Station Canopy Light is another option designed for fuel stations, convenience-store canopies, service areas, and other overhead commercial applications.

Browse the complete LED Canopy and Parking Garage Lighting Collection to compare available fixture styles and configurations.

Product Specifications

Brand: Contractor Direct Lighting
Item code: LC1006
Fixture type: Square LED wide beam angle canopy light
Selectable wattage: 60W / 75W / 90W
Lumen output: 7,920–12,557 lumens
Input voltage: 120–277V
Selectable CCT: 3000K / 4000K / 5000K
Dimming: 0–10V
Beam angle: 190°
CRI: 80+
Power factor: Greater than 0.9
Housing: Die-cast aluminum
Lens: Polycarbonate
Finish: Bronze
Surge protection: Built-in 6KV
Environment: IP65, wet location and outdoor use
Recommended mounting height: 15–20 feet
Operating temperature: -40°F to 122°F
Rated life: 50,000 hours
Warranty: Five years
Compliance: cULus certified, DLC approved, FCC compliant and RoHS compliant.

Why Choose the LC1006?

The LC1006 combines several important commercial-lighting features in one fixture:

  • Very wide 190-degree light distribution
  • Three selectable wattage levels
  • Three selectable color temperatures
  • Up to 12,557 lumens
  • 0–10V dimming
  • Optional photocell support
  • Integrated sensor port
  • 6KV surge protection
  • IP65 wet-location construction
  • 50,000-hour rated life
  • Five-year warranty

For contractors and facility managers, this flexibility can simplify fixture selection while supporting different site requirements across the same property.

Stop Letting Poor Lighting Undermine Your Property

A dark gas-station canopy, parking structure, loading area, or entrance can affect visibility, customer confidence, and the overall appearance of a property.

The LC1006 helps deliver broad, adjustable, commercial-grade illumination for demanding covered outdoor spaces.

Light more area. Reduce dark spots. Create a brighter and more professional property after sunset.

Shop the LC1006 LED Wide Beam Angle Canopy Light

Explore more outdoor LED lighting solutions, or visit Contractor Direct Lighting for commercial and industrial fixtures built for real-world projects.

Next article Outdoor Lighting That Improves Safety, Security, and Curb Appeal

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare